1. Where can I use my Litecubes?
2. How do I turn Litecube products on and off?
3. How long do Litecubes last?
4. Can the Battery be replaced in a Litecubes?
5. What makes Litecubes glow?
6. How should I care for them?
7. Can Litecube products be customized with a logo?
8. Are there any outstanding safety issues?
9. How can I tell if I have a authentic, safe Litecube?
10. What is your minimum order for wholesale customers?
11. I have questions not listed here.

All Litecube products are fully sealed against liquids, but do not require immersion to produce wonderful color. Use them in drinks, floral arrangements and vases, punch bowls, fountains, paper lanterns...wherever your imagination takes you.
Litecubes may be frozen and used, but can just as easily be used at room temperature. When frozen, Litecubes resemble glowing pastel freezer pops. At room temperature they are bright and clear jewel tones.

For maximum beauty and drink-cooling power, use Litecubes with real ice.

Back to Top

With most Litecube products a single push of the button produces a "heartbeat" pulse, a second produces a fast blink, the third push turns it steadily on and a final one turns it off.

The exception to this rule are the "Rainbow" products, where each push of the button produces a differing color effect or turns the effect off

Back to Top

Boy, that's a tough question. It's a little like asking how long will my ball of string last...it depends on how you use it, how often you use it and how much you use it at any given time.

The short answer is long enough to have lots and lots of fun with them. The long answer is, well, complicated.

With intermittent usage, any cube should get approximately between 30-120 hours depending upon shape, mode and usage.

Some cubes use power at a faster rate than others. Some will show very little decline for a long period of time, others will show some reduction in brightness, reach a plateau of still very serviceable light and then go on for hours and hours.

If, however, you choose to use them steadily, they will certainly last through a social event but their life span will not be as long. If you use them in flashing or pulsing mode, this will extend the life span.

Using your Litecube intermittently and allowing it to "rest" between uses maximizes the life of the lithium battery. Should you decide to freeze your Litecube product, rest assured that the lithium battery within likes the cold and it won't slow it down a bit!

Remember, ALL Litecube products will easily get though any normal length event and with the propensity of guests to take them home, we can almost guarantee that they'll still be using their cubes (and remembering your event) for weeks and months to come.

Liteshots will last 8-16 hours and have replaceable AG13 batteries.

Back to Top

It depends on the product. The answer in the case of most Litecube products is, unfortunately, no because, to be used in and around food items and in liquids, the battery must be double sealed within the cube and cannot be removed or recharged or replaced.

We strongly urge customers considering the battery issue to avoid those illegal copies of the cube which, while they may look identical, offer replaceable batteries. They are not the safe, dependable Litecube which has been built to FDA standards. Besides, because the cost of a replacement battery would be more than the Litecube itself, it wouldn't be economically feasible for a customer to do so.

Having said that, the Lite Shot (glassware) is the exception in that it does allow for replacement batteries to be inserted into the exterior base - well away from contact with the human mouth or liquids.

Back to Top

With the exception of the Lite Shot, Litecube products contain either one or two Lithium batteries that powers either one or three small LED bulbs. They also contain a specially designed non-toxic freezing gel designed to enhance and magnify the light being emitted.

Back to Top

We recommend that Litecubes be hand washed with hot soapy water before and between uses. Dishwasher use is not suggested.

Turn Litecubes off between uses and store them out of direct sunlight. They may be stored in the freezer if desired.

Back to Top

Yes, in one way or another all Litecube products can be customized with a logo either by inserting an image inside at the time of manufacture, or by pad printing in FDA approved food-grade ink on the exterior of the cube.

Back to Top

As the creators of this product, Litecubes worked very diligently in the design to produce an item that could be used around food and drinks being consumed SAFELY by humans and we are happy to report that our cube components have passed FDA muster for such usage. Indeed, we even count several federal government agencies as our clients!

In the extremely rare event of one breaking or cracking, please be aware that the gel inside is non toxic, but you should discard the cube and the drink that it is in immediately.

We will be happy to send you testing and other health and safety documentation upon request.

Litecubes are not meant for use by children under 3 years old because they may pose a choking hazard.

Back to Top

It is a sad fact of life that a successful product is replicated, often by individuals who have no concern for the health and safety of the end user of the product.

By replicating the Litecube design, it makes it difficult to detect false cubes at first glance. However, if you turn an authentic Litecube product over, you should see the our "light bulb" logo on the bottom.

Litecube vigorously and aggressively defends it's patent and copyrights worldwide. It is illegal to sell or to purchase Litecube simulates.

Back to Top

For retail customers, our minimum order is now 1 dozen cubes of the same color or shape.

For wholesale customers, it 24 of any given color or shape, with the exception of Lite Shots which are packaged in dozens. Wholesale customers should please think in terms of 24 of any one color. If you need around 30 pink Litecubes, please decide to order either 24 or 48 of that color.

A caseload of Litecubes equals 288 units.

The minimum requirements for pad printing messages on cubes is 144 units for both retail and wholesale customers.

Back to Top

It is our pleasure to help you anyway we can. Please click here to go to our contact page. We'll get back to you wish an answer as soon as possible.

Back to Top

1. What is a Glohat?
2. How do I turn a Glohat on and off?
3. How long do the batteries last and can they be replaced?
4. Can Glohats be customized with a logo?
5. What is your minimum order for retail and wholesale customers?
6. I have questions not listed here.

Glohats are simply classic baseball caps whose brim’s front edge is lit. Made of high quality 100% cotton, these unique, patented hats are a certain eye-catcher.

Back to Top

The compartment which holds the batteries just needs to be lightly pressed to turn the hat on or to change the mode from heartbeat pulse to blink, from blink to steady full on and then to off.

Back to Top

The pre-installed batteries last between 30 and 60 hours depending, among other things, upon how the lights are set, (blinking or pulsing mode uses the least power).

The CR2032 batteries can be replaced using a small screwdriver.

Back to Top

Yes, although we have found that not all commercial embroidery companies can stitch on the heavy duty cotton front of the hat. We’ve found someone who can and would be happy to handle the process for you on as few as 72 hats. Additional hats must be ordered in multiples of 12 thereafter.

Back to Top

The minimum retail order is one hat. Wholesale customers should couch their orders in multiples of 12 units.

Back to Top

It is our pleasure to help you anyway we can. Please click here to go to our contact page. We'll get back to you wish an answer as soon as possible.

Back to Top

1. What is a Glostraw?
2. How do I turn a Glostraw on and off?
3. How long do the batteries last and can they be replaced?
4. Can Glostraws be customized with a logo?
5. What is your minimum order for retail and wholesale customers?
6. I have questions not listed here.

Glostraws are, well, drinking straws which light up with the help of LEDs. These are fully functional, pulsing, blinking, strobing straws that are a guaranteed good time party item.

Back to Top

The compartment which holds the batteries has a small button at the end of it. To turn the straw on or change between any of the four different multi-colored modes, just keep pushing this button.

Back to Top

The pre-installed batteries last between 12 and 24 hours depending, among other things, upon which of the four modes are used…(hint…mode 4 uses the least power).

For food safety reasons, the batteries cannot be replaced.

Back to Top

Yes, on the battery pod found at the base of the straw on as few as 140 straws. Additional printed straws should be ordered in increments of 10.

Back to Top

The minimum retail order is one straw. Wholesale customers should couch their orders in multiples of 10 units.

Back to Top

It is our pleasure to help you anyway we can. Please click here to go to our contact page. We'll get back to you wish an answer as soon as possible.

Back to Top